Hoogland Machinery B V

Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 2
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 3
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 4
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 5
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 6
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 7
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 8
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 9
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 10
Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant - Image 11

Warner and Swasey 4A M-3550 Turret Lathe – Front/Rear Chucks, Under Power In Plant

€ 29.900,00

SWING OVER WAYS: 28-1/4″ SWING OVER CARRIAGE: 22-7/16″ DISTANCE SPINDLE TO TURRET FACE: 59-1/4″ SPINDLE SPEEDS: 10 TO 526 RPM TURRET FEEDS: (16) .005 TO .167 IPR CROSS SLIDE FEEDS: (16) .002 TO .077 IPR DIAMETER OF SPINDLE HOLE: 12.5″ FRONT/REAR CHUCKS: 24″ 4 JAW NUMBER OF TURRET STATIONS: 6 RAPID TRAVERSE: YES

SKU: 28947381908
Category:

Description

SWING OVER WAYS: 28-1/4″
SWING OVER CARRIAGE: 22-7/16″
DISTANCE SPINDLE TO TURRET FACE: 59-1/4″
SPINDLE SPEEDS: 10 TO 526 RPM
TURRET FEEDS: (16) .005 TO .167 IPR
CROSS SLIDE FEEDS: (16) .002 TO .077 IPR
DIAMETER OF SPINDLE HOLE: 12.5″
FRONT/REAR CHUCKS: 24″ 4 JAW
NUMBER OF TURRET STATIONS: 6
RAPID TRAVERSE: YES

Related products