Description
Working Area: 48″ X 96″
Gantry Clearance (Z Axis): 10.5″
Spindle Motor: 5.5HP
Spindle: HETICO Spindle, ISO30
Spindle RPM: 6000 – 24,000RPM
Dust Port Diameter: 4″
Vacuum Table: 4 Zones
Power: Single or 3PH 220V
Cut Rate: 800 IPM Maximum – 600 IPM optimal in 3/4 melamine particle board with 3/8 compression bit
Approximate Weight: 4000-5000 LBS
Equipped With:
Masso G3 Controller
All New 12mn Servos and Drivers
10 HP Vacuum with New Vacuum Pump
Dust Collector
2 Extra Spindles
